ClearCube A1010 User Manual page 9

symbol displayed on ClearCube Technology, Inc. products and explains the meaning of each
symbol.
Refer to Manual
Used on the equipment's rating label to direct the operator or service person to
this manual for additional information.
Shock Hazard
This symbol indicates the presence of electric shock hazards. Enclosures marked
with these symbols should only be opened by qualified service personnel. Refer
to the manual for additional information.
Power
Identifies the soft-start switch located on rear of the blade, used to power a blade
on and off.
Fuse
Located on equipment rating label. Symbol is accompanied with the
specifications needed for replacement. Only qualified technicians should
perform this operation.
Protective Earth Terminal
This symbol identifies the terminal that is used to connect all metal parts of an
enclosure through an external conductor to ground for protection against
electrical shock in a fault condition.
Ground Bond Terminal
This symbol identifies the ground bond terminal. This terminal is used to
connect the ground bonding conductor, or the combination of conductive parts,
to earth ground for safety purposes.
Equipment Protection Class II
May be located on the power adapter's rating label. Indicates that equipment is
double–insulated from hazardous voltages. Not to be confused with Class 2, a
US National Electrical Code (NEC) circuit classification.
The following caution and warning symbols are used in this document to indicate situations
that merit checking this or another manual, or situations that could result in damage to
equipment or physical injury.
CAUTION—A Caution notice in this manual indicates that
equipment damage or minor injury may result if proper
procedures are not followed.
Symbols • ix