Chapter 2. Site Preparation And Network Planning; About Your Shipment; Inspecting Your Shipment And Devices - ClearCube A1010 User Manual

Chapter 2. Site Preparation and Network
This chapter describes preliminary steps to take after receiving your A-Series shipment, and
describes the hardware and environmental requirements for your A-Series products. The
following list identifies the each of the topics discussed in this chapter.
• "About Your
• "Rack and Cabinet
• "Space and Floor Support
• "Cooling and Airflow
• "Chassis and Blade Power
• "Cable

About Your Shipment

This section describes precautions to follow before unpacking your shipment and the order in
which to unpack each device in your shipment.

Inspecting Your Shipment and Devices

Examine the outside of all containers in your shipment before opening them.
Note:
If you discover damaged devices after unpacking your shipment:
• Contact the shipper to notify them of the damage
A-Series User's Guide
Planning
Shipment" on this page
Requirements" on page 12
Requirements" on page 14
Requirements" on page 21
If you find any external damage to the containers that were shipped to you, do not
open them. Notify the shipper that damage has occurred and request that they inspect
the containers before you unpack them.
Requirements" on page 14
Requirements" on page 15
11