Changing The Ribbon Of The Integrated Printer - Thermo Scientific VARIOKLAV 25T Operating Manual

Figure 18: Inserting paper into the paper feeder

11.4 Changing the ribbon of the integrated printer

If the printout starts to appear faded after a longer period of use, the printer ribbon
should be replaced.
INFORMATION
Do not pull the paper out of the printer. Use the Paper feed key
for this purpose.
Never pull the paper backward, because this may damage the
printer.
♦ Press both the Printer ON/OFF key (26) and the Paper feed key (27)
♦ Remove the printer cover (25).
♦ Hold the left end of the ribbon cartridge with your left hand.
♦ Press on the right end of the cartridge.
♦ Remove the cartridge.
♦ Take a new cartridge.
♦ Insert the left end of the new cartridge in the left corner of the printer
♦ Press the right end of the cartridge down into the right corner of the
♦ Replace the printer cover (25). Guide the paper through the slot of the
03/2007
11 Maintenance and cleaning
concurrently.
The printer cover (25) opens.
This will lift the left end of the cartridge.
head.
Make sure that the cartridge is parallel to the ribbon guide.
printer head.
printer cover (25).
note direction, arrow)
(
54
DA0621_a/