Configuring Programs - Thermo Scientific VARIOKLAV 25T Operating Manual

9 Configuring programs

As delivered by the factory, each control panel program key (18) is pre-set with
one program each. Depending on which programs are present, the microprocessor
control may offer additional programs. Authorized operators can use the key-
operated switch to change the configuration of the programs permanently within
the technical limits of the unit and to reprogram program keys.
INFORMATION
The sterilizer is protected from inadvertent changes in
configuration by a key-operated switch (17).
Remove the key from the key-operated switch while the
sterilizer is in operation.
Carefully store the key in a safe place.
INFORMATION
The program key P
Liquids sterilization program.
Authorized operators can thus define individually configured programs for the
program keys P
Starting configuration
♦ Insert the key into the key-operated switch (17).
Reprogramming a program key
♦ Select the one of the both program keys (18) P
♦ Turn the key-operated switch (17) to the configuration position ("Konfig.").
Each time the selected program key is pressed, the cycle display shows the
available parameters for the sterilization process:
•
•
•
•
•
•
•
•
03/2007
9 Configuring programs
is solely designed for activating the
3
or P .
1 2
to choose an individual program.
Program
Sterilizing temperature
Sterilizing time
Drying time (option)
Vacuum (option)
Removal
Multiple sterilization number (option)
Batch number
or P for which you wish
1 2
38
DA0621_a/