In Case Of Emergencies; Disconnecting From Mains; Termination Program - Thermo Scientific VARIOKLAV 25T Operating Manual

1.1

In case of emergencies

1.1.1 Disconnecting from mains

DANGER
No matter what the problem, never use force when opening or
closing the swing door of the sterilizer. LIFE HAZARD!
The system might be damaged!
CAUTION
If problems occur that might be harmful to persons or
property, the unit must be immediately disconnected from the
power supply by pulling out the mains plug from the socket!
INFORMATION
The mains plug socket of the sterilizer must be freely
accessible. In case of failures, it is used to disconnect the
sterilizer from mains.
The sterilizer is disconnected from mains.
Contact the authorized Thermo service:

1.1.2 TERMINATION program

CAUTION
Should any anomalies and / or problems occur while the
sterilizer is ready for use or while running a sterilization cycle:
Press the green START/STOP key to terminate any ongoing
programs, if necessary.
INFORMATION
To deactivate the Preheating program, press the Preheating
key (22).
Examples of possible anomalies or problems:
•
•
•
Pressing the START/STOP key terminates the sterilizing program. The device will
enter a state in which the load can be safely removed.
If you had inadvertently chosen an inappropriate program:
♦ Select the correct sterilizing program for your load.
♦ Start the newly selected sterilizing program.
In case of anomalies and problems:
♦ Contact the authorized THERMO service:
03/2007
1 Safety considerations
Steam escapes from behind the cover or from the disposal area;
Water dropping from the bottom of the unit;
Incorrect choice of program with adverse consequences for the items to
be sterilized (e.g. excessive sterilization temperatures).
10
DA0621_a/