Thermo Scientific VARIOKLAV 25T Operating Manual page 59

Metering equipment
R
Recooling
Reference flask
Reference temperature
To reproduce
S
Septic
Safety Valve
Set temperature
Steam pot
Steam release
Steam sterilizer
Sterile venting
To sterilize
Sterilizer
Sterilizing articles
Sterilization phases
Sterilizing temperature
Sterilizing time
T
Temperature sensor
Thermally instable
Thermolock
Toxic
V
Vacuum
03/2007
14 Glossary
Equipment for measuring a specific quantity
Cooling the sterilizing chamber and the sterilized
articles after sterilization
Liquid-filled flask, in which the temperature of the liquid is
measured with a temperature sensor
Temperature at the reference point (e.g. reference
flask) in the sterilizer
To repeat
Non-sterile, causing disease
Valve which automatically releases steam or air when the
pressure in the sterilizing chamber becomes too high
The temperature which has to be reached
Device for heating liquids, for maintaining the
temperature of liquids, and for dissolving agar.
Removal of steam from the sterilizing chamber
Equipment for carrying out degerming under the effect
of steam
Venting with decontaminated (sterile) air
To degerm, to eliminate all micro-organisms
Equipment used for sterilizing
Liquids or solids destined for degerming
Parts of a sterilization cycle
Temperature needed for sterilization
Time needed for sterilization
Thermometer
Not stable when heated
Safety feature preventing premature opening of the door.
It is controlled via the reference temperature. The
temperature of the liquid must be below 90 °C before the
sterilizing chamber can be opened.
Poisonous
Negative pressure
59
DA0621_a/