Quick Charging (Charging Method With Quick Charger) - Mitsubishi i-MiEV 2011 Owner's Manual

Charging
NOTE
l Make sure that the inner lid is completely
closed.
If the regular charging lid is forcibly closed
without completely closing the inner lid, the
hinge on the inner lid may be broken.
11. Remove the charging cable plug from the out-
1
let.
12. Install the cap on the regular charging plug.
WARNING
l After charging, be sure to close the inner
lid and the regular charging lid complete-
ly.
Be careful that water or dust does not en-
ter in the regular charging connection, in-
ner lid and regular charging plug.
Entry of water or dust could cause elec-
tric leakage, resulting in a fire or electric
shock.
l After charging, be sure to disconnect the
plug from the outlet.
If the plug is left connected to the outlet,
immersion in water or tampering may
cause leakage or an electric shock.
1-08
Quick charging (charging
method with quick charger)
E08301400027
WARNING
l
Be sure to use the quick charger compati-
ble with i-MiEV.
Use of a non-compatible quick charger
may cause fire or malfunction.
For the quick charger compatible with
i-MiEV, consult a MITSUBISHI
MOTORS Authorized Service Point.
l For operation of quick chargers, follow
the manual of each quick charger.
l Persons who use electro-medical appara-
tus such as implantable cardiac pacemak-
er or implantable cardioverter- defibrilla-
tor must check effect from charging with
the manufacturer of electro-medical appa-
ratus. Electro-medical apparatus opera-
tions could be affected by charging.
l Before charging, make sure that there is
no foreign matter such as dust at the
quick charging connection and the quick
charging plug.
At this time, do not touch the quick charg-
ing connection.
WARNING
l When the quick charging plug is connec-
ted to the quick charging connection, pre-
vent foreign matter such as water or dust
from entering in the connection.
Connection with foreign matter such as
water or dust may cause fire or an elec-
tric shock. Do not perform charging if
there might be strong exposure to water
at the connection.
CAUTION
l During charging, the cooling fans inside
the bonnet room may automatically be op-
erated even if the electric motor switch is
in the "LOCK" position.
Keep your hands away from the cooling
fan during charging.
NOTE
l Make sure to lock the doors to prevent theft,
etc. during charging.
1. Fully apply the parking brake and move the
selector lever to the "P" (PARK) position.
2. Stop the electric devices such as lamps, air
conditioning, etc. and turn the electric motor
switch to the "LOCK" position.