Hardware Configuration Registration - Toshiba LC531 Series Instruction Manual

Chapter 4 Registration and Setting Using Engineering Tool

4.2 Hardware Configuration Registration

Register hardware configuration with the system product tree of the nv
Engineering Tool. The system name and station configuration are as follows.
Hardware configuration shall be registered using the product tree of the nv
Engineering Tool. Registration items such as System name and Station
configuration are shown below.
4.2.1 Hardware configuration registration
58
6F8C1388
System name and station configuration
Table 4-1
Level Name/slot No.
LC531_Sample
System
LC531
Station
Unit Unit No.:
Module Slot No.:
Start the nv Engineering Tool (Product tree).
Select the "System" folder at the upper left of the screen with the
mouse and select <New> in the menu of <File>.
Enter a system name (LC531 Sample in this example) in the text box of
the input dialog.
Figure 4-2 Adding a system
nv oneloop station
0 MainUnitLC
0 LC53*
Device name