Tag Variables (Pv, Lp, Pb) - Toshiba LC531 Series Instruction Manual

Appendix E Details of Variables
E.2 Tag Variables (PV, LP, PB)
■ About explanation items in the table
Ｅ
160
6F8C1388
Details of tag variables (PV, LP , PB) that can be used for LC53* are described
below.
Item name Parameters with
downloaded to the controller. When tool information is
imported to the OIS, the parameters are used as display
information of the OIS.
Square brackets " [ ] " indicate the unit of the
parameter/data.
 indicates setting or input condition. Only the one that
Description
satisfies all conditions can be input.
○ indicates the state display or data display.
OIS ↓ indicates it is writable from the OIS.
↑ indicates a change notification is made to the OIS when it
is rewritten from the Engineering Tool, side keyboard, or
user application.
― indicates it is write-protected.
○ indicates that it is a parameter/data displayed in the OIS.
× indicates that it is a parameter/data not displayed in the
OIS.
DSP Display / operation on the Side display (
In the tag area, do not use the areas not
CAUTION
listed because they are reserved for the
system.
Using these areas may cause malfunction of the LC53*.
are saved as tool information but not
۞
: Yes / : No)
Prohibited