3.2Tool Setting and Operation
3.2.1
AN712 module registration
The procedures for registering AN712 modules and a network in cases where AN712
modules are installed in an S3 controller are described below.
(1) Station registration
Register stations, which include AN712 modules, on the Product View screen. Select
[Station] under a created system (Integrated Controller ADMAP system in the example),
3
and choose [New Create (W)]. [ADMAP-Stn (model 3000)] is created in the example.
Add units to the station as follows: Select [Unit] under the created station [ADMAP-Stn
(model 3000)], and choose [New Create (W)]. [ADMAP-Stn (model 3000)] is created in
the example.
9
6F8C1048