Toshiba LC531 Series Instruction Manual page 193

Item name Abbr.
SEQ-SV intervening SSV
CMP-SV intervening CSV
SEQ-MV intervening SMV
CMP-MV intervening CMV
CMP intervening CMP
SEQ intervening SEQ
Cascade connection CC
Pulse output request POR
flag
(For future use)
MV error MEU
unconfirmed
Control inactive CLU
unconfirmed
MV high alarm MHU
unconfirmed
MV low alarm MLU
unconfirmed
Deviation alarm DVU
unconfirmed
Valve position error VPU
unconfirmed
Table E-12 Data of [Controller variable] (LP_DATA) (2/2)
Used for user application
Used for user application
Used for user application
Note: When SMV for user application is ON, MV to be changed
by application program will be sent to AO output
regardless of the condition of the control mode.
Used for user application
Used for user application
Used for user application
Used for user application
●When Pulse is selected for [Output signal type] (MSIG), this
flag is used to indicate the timing to send pulse output.
OFF, ON ： Pulse output is executed when ON.
○Unconfirmed bit of each error.
Note: When "LDU alarm restoration method" for module
parameter is a confirmed restoration method, this is used
as unconfirmed bit. This is used in auto restoration.
Unified Controller nv Series Single-Loop Controller LC531/LC532 Instruction Manual
E.2 Tag Variables (PV, LP, PB)
Description OIS DSP
○ ↑ ○
○ ↑ ○
○ ↑ ○
○ ↑ ○
○ ↑ ○
○ ↑ ○
○ ↑ ○
× ↓ ○
× ― ×
Ｅ Ｅ
173