Toshiba LC531 Series Instruction Manual page 49

Installing panel
Housing side
Support angle
Use L-shaped
type.
Figure 2-4 Using the support angle fixing hardware
Clamping hardware
Housing top
Bar
Housing side
Figure 2-3 Using the clamping hardware
2.5mm or more
25mm or more
Unified Controller nv Series Single-Loop Controller LC531/LC532 Instruction Manual
2.2 Installing or Removing the LC531/LC532
3 Rotate the bar to fix the housing
to the installing panel.
Screwdriver
Support angle
Housing back
24
Support angle
4 Fix the housing to the support
angle with the support angle
fixing hardware.
29