Screen Execution Overview - Toshiba LC531 Series Instruction Manual

6.1.4 Screen execution overview

The state transition diagram (overview) of the side display screen execution is
shown below.
(1)
When power is turned on, the initial screen appears and when initialization is
completed, main menu screen appears.
(2)
When you select the desired item (select the desired item with
press
(3)
When you press
displayed, the screen changes to data setting (rewrite) screen.
(4)
Pressing
(5)
Pressing
(overwritten) and the screen returns to the previous screen.
(6)
Pressing
(7)
Pressing any key returns to the previous screen.
(8)
Pressing
for a certain time, the screen changes to key lock screen.
(9)
Pressing
Power ON
Help
or press a numeric key), the screen changes to submenu screen.
key on the screen where data (such as PV value) is
key returns to one-step previous screen.
key on the data setting screen, the entered data will be set
key on each screen, its Help screen appears.
key longer (2 seconds or more) on each screen or no key is pressed
key longer (2 seconds or more), the screen returns to main menu.
Initial screen
(1)
Main menu
(2)
(6)
６
２
Sub menu
１
Sub menu
(7)
０
Sub menu
(3)
Data setting
Figure 6-3 Transition of screen execution
Unified Controller nv Series Single-Loop Controller LC531/LC532 Instruction Manual
6.1 Side Keyboard and Side Display Overview
(4)
Sub menu
(8)
(4) (5)
or key and
(9)
ata setting
Operation d
95