Change The General Variables - Toshiba LC531 Series Instruction Manual

H.2.5

Change the General Variables

(Example) Change the internal variable Y4 of EC_BUS to 20.5. (Real type)
Operation Display[4][6][0003]
Y [0003]Real
Screen
0
(Example) Change the internal flag S6 of EC_BUS to ON. (BOOL type)
Operation Display[4][5]
S [0000]Bool
Screen
0000000000000000
Remark
• BOOL type display
If the variable is of BOOL type, it is displayed in binary (max. 16 points). For example, internal
flags of EC_US (S1-S16) are displayed in binary (16 points). The left end indicates the most
significant bit (S16), and the right end indicates the least significant bit (S1).
(Example) Display W [0000] in UNIT (single integer without sign) and change
Operation Display[4][1][  ][  ]
W [0000]Unit
Screen
0
Remark
• For a general variable, any data type can be selected. After displaying variable data, press
data types vary depending on the variable type.
Data types
Real (real type), Dint (signed double-length integer type), DWord (double-length hexadecimal
type)
Int (signed integer type), Unit (unsigned integer), Word (hexadecimal type), Bool (binary type)
the value to 65535.
to move the cursor to data type, and press
Unified Controller nv Series Single-Loop Controller LC531/LC532 Instruction Manual
H.2 How to Operate Side Keyboard
Setting[Enter][  20.5]
Y [0003].Real
 20.5
Setting[Enter][]  10 times [1] →
[Enter]
S [0000]Bool
0000000000100000
Setting[Enter][65535] [Enter]
W [0000]Unit
65535
to select the data type. Available
Check → [Enter]
Y [0003]Real
-20.50000
197
H