Toshiba LC531 Series Instruction Manual page 79

4.2 Hardware Configuration Registration
Double-click the created system (LC531 Sample) at the upper right of
the screen to open the system and select the "Station" folder shown at
the lower left of the screen with the mouse and select <New> in the
<File> menu.
Enter a station name in the text box of the input dialog.
Figure 4-3 Adding a station
Expand the created "LC531 (nv oneloop station)" at the upper left of
the screen with the mouse, select the "Units" folder with the mouse,
and select <New> in the menu.
Select the unit number (0) and unit model name (MainUnitLC) in the
input dialog.
Figure 4-4 Adding a unit
59
Unified Controller nv Series Single-Loop Controller LC531 Instruction Manual