4.5.1 DN912 Registration
■ Register the configuration
Register DN912 to I/O node
1
Select [I/O node] and select Menu-[File]-[New].Set the desired I/O node No. and [I/O node device name =
DN912] and click [OK] button.
■Setting module parameters
Start the module parameter setting screen
1
Select [DN912-M] and select Menu-[File]-[Module Parameter].
Figure 4-34 New I/O node creation screen
Figure 4-35 Starting the module parameter screen
Unified Controller nv Series DeviceNet Module DN912 Instruction Manual
4.5 Settings on Engineering Tool
69