Copy Settings; Select Individual Items To Be Copied (Master Unit Only) - Citizen SA-SD Operation Manual

6-4 Copy Settings

6-4-1 Select Individual Items to Be Copied (Master Unit Only)

Parameter name
Copy select (CPY.SEL)
The settings on the master unit can be copied to the slave units that are connected to it.
Each item to be copied can be selected individually, or all settings can be selected together.
If the Execute copy parameter CPY.EXE is set to YES, pressing the ENTER key executes copying.
Slave units are provided with a function that prevents copying from a master unit.
Items that can be copied
■
Setting
Basic settings
Detailed settings
Operation procedure
■
Long press
for 2 s
Items to be copied are selected individually.
YES / NO
HIGH setting value (HI.SET)
LOW setting value (LO.SET)
Hysteresis (HYSTER)
Teaching type (TEACH)
Tolerance <±> (TOL<±>)
Preset value (PR.VAL)
Select preset data (PR.OBJ)
Preset save (PR.SAVE)
Measurement direction (DIRECT)
Lever ratio (LEVER)
Response time (SPEED)
Output behavior (OUTPUT)
Hold settings (HOLD)
External input (EXT.IN)
External output (EXT.OUT)
Display digits (DIGIT)
Eco mode (ECO)
Alarm settings (ALARM)
Change
6- 46
Setting value
[Default: YES]
Item
Basic settings (total of 12 items) Detailed settings (total of 6 items)
Remarks