Display Digits - Citizen SA-SD Operation Manual

6-2-5 Display Digits

Parameter name
Display digits (DIGIT)
Operation procedure
■
Long press
for 2 s
Note
■
Independent of the number of digits, numbers are displayed right-aligned.
Setting the number of digits only affects the display of normal measurement (NORM.V), LOW
setting, HIGH setting, sensor head measurement, calculation, and judgment (JUDGE.V) values.
Judgment output does not affect changes in the number of displayed digits.
Setting value
Changes the number of digits shown after the decimal point on
the digital display.
0.1 / 0.01 / 0.001 / 0.0001
Select
Commit
6- 35
Remarks
[Default: 0.0001]
Cancel
Select