6-2-2 All Input
Parameter name
All input (ALL IN)
When the trigger or preset inputs into all of the master and slave units which are connected together share the
same timing, the trigger/preset inputs into the master unit can be set to be input into all of the slave units.
This allows the amount of wiring in the system to be reduced.
Operation procedure
■
Long press
for 2 s
Note
■
Input all can only be set for a master unit to which slave units are connected.
When a trigger is input to a master unit, the signal can be input to
all connected slave units simultaneously.
ONE (Single) / ALL (All)
Select
Commit
6- 31
Setting value
[Default: ONE]
Cancel
Remarks