Citizen SA-SD Operation Manual page 55

Note
■
An indefinite state is held on occurrence of any of the following:
The power is turned ON
The reset input is ON
A sensor head disconnection error or upthrust error (alarm) is canceled
If the input value falls below the self trigger level before settling within the static width, the
controller enters an alarm state. (In the case of the self trigger edge direction being set to UP)
Note that, with this type of self sample hold, the judgment output is not the same as the judgment
value. After the input value exceeds the specified self trigger level (in the case of the self trigger
edge direction being UP), the judgment output is all OFF until the normal measurement value
settles within the specified static width.
When self sample hold is selected, external trigger input has no effect.
Operation procedure
■
Long press
2秒長押し
for 2 s
BASIC
Select
選択
CALC COPY
/
ALL.IN EXT.IN
/
S-H P-H B-H P-P P-P/2
6- 25
BANK CALIB RESET MAINTE
EXT.OUT DIGIT ANALOG ANA.HI
Cancel
キャンセル
NG-H
Select
選択
Select
選択
Select
選択
Select
選択
Commit
確定
ANA.LO ECO ALARM
SLF.P-H SLF.B-H
Cancel
キャンセル
Shift between Change numerical
digits
values
桁移動 数値変更
Cancel
キャンセル
Cancel
キャンセル
Cancel
キャンセル
Shift between
Change numerical
digits values
桁移動 数値変更