Insert the wire into the wire insertion port as far as it will go. As in the figure below, check that the
sheathed section of the wire reaches inside the wire insertion port, and that the tip of the core wires
passes through the connection section.
Wire sheathed
section
Connection
section
Tip of core wires
■
Be careful to ensure that wiring is performed correctly, as wiring errors may result in failure.
Through the release port, apply the tip of a flat-blade screwdriver to the lower part of the control lever
(white), and move the tip of the screwdriver upwards. A snapping noise indicates that the control lever
(white) has returned to its original position, thereby fixing the wire.
Release port
Pull lightly on the wires to check that they are not loose.
Move the protecting cover in the direction of the arrow to return its original position.
Wire insertion
port
Caution
Control lever
(white)
3- 4
Terminal No.
Connecting wire
Red
White
Green
Black