Preset Save (Pr.save) - Citizen SA-SD Operation Manual

6-1-8 Preset Save (PR.SAVE)

Parameter name
Preset save (PR.SAVE)
Operation procedure
■
■
Long press
2秒長押し
for 2 s
HI.SET LO.SET
Note
■
The memory (EEPROM) used for saving preset values can be overwritten up to approximately one
million times.
If there is no need to save preset values, set Preset save to OFF.
If preset is performed using keys, the preset data is maintained after the power is turned off
because it is written into internal memory.
Related information
■
If the preset input is set to external input, the external input can be used to perform the preset.
For details of preset input from external input, refer to "6-2-3 External Input."
If Preset save is set to ON, the preset and offset values are
written to an EEPROM so that they are retained after the power is
turned OFF.
ON / OFF
ADVANC CALC COPY BANK
HYSTER TEACH TOL <±> PR.VAL PR.OBJ
Select
選択
Commit
確定
6- 12
Setting value
[Default: OFF]
CALIB RESET MAINTE
/
DIRECT
Cancel
キャンセル
Remarks
LEVER SPEED OUTPUT