Citizen SA-SD Operation Manual page 34

Calibration settings (CALIB)
Calibration select
(CAL.SEL)
∗ When calibration select is set to USER (setting by user)
Captured measurement value
1 (CL.SET1)
Captured measurement value
2 (CL.SET2)
Adjustment value 2 (AJ.VAL2)
Resetting (RESET)
Reset (RESET)
Maintenance
Total stroke work history
(SUM.REC)
Maximum peak value
(MAX.VAL)
Maximum peak value history
(MAX.REC)
Overstroke history
(OVR.NUM)
When a sensor head is replaced, carrying out zero and
span adjustment reduces the errors existing at installation
time.
DEFAUL (Default) / USER (Set by user)
The controller moves the spindle to the zero point (which
constitutes the calibration reference), and captures the
measurement value.
The controller moves the spindle to the target point for span
adjustment, and captures the measurement value.
Inputs a target value.
−199.9999 to 199.9999 (mm)
This resets the controller settings (excluding calibration
settings) to the factory defaults.
YES / NO
Displays information such as sensor head operational
history.
6- 4
[Default: DEFAUL]
[Default: 10.000]