Preset (Pr.val) - Citizen SA-SD Operation Manual

6-1-6 Preset (PR.VAL)

Parameter name
Preset value (PR.VAL)
Preset is a function that adds the set value to a measured value. If a preset value is set, the current value
becomes the preset value when the controller executes the preset.
For example, when configuring the preset for a master work, set the preset value to 3.5 mm in order for its
position to be displayed as 3.5 mm.
Operation procedure
■
Long press
2秒長押し
for 2 s
HI.SET LO.SET
Related information
■
For details of how to operate the preset function, refer to "5-7 Preset."
Normal measurement or judgment value can be selected as the value to which the preset function
applies. For details of setting method, refer to the next section.
Sets the reference value when the preset function is turned ON.
−199.9999 to 199.9999 (mm)
ADVANC CALC COPY BANK
TEACH TEACH TOL <±>
Select
選択
Commit
確定
6- 10
Setting value
[Default: 0.0000]
CALIB RESET MAINTE
/
PR.OBJ PR.SAVE DIRECT
Cancel
キャンセル
Shift between
Change numerical
digits
values
桁移動 数値変更
Remarks
LEVER SPEED OUTPUT