Product Overview; Outline - Citizen SA-SD Operation Manual

2. Product Overview

2-1 Outline

When connected to a detector, the SA-SD controller can be used to measure size and perform
pass/fail judgments.
Controller
■
Model
SA-SD1AP Master/high performance
SA-SD1AP-P Master/high performance
SA-SD1AC Slave/high performance
SA-SD1AC-P Slave/high performance
SA-SD1C Slave/standard type
SA-SD1C-P Slave/standard type
SA-SDNC Slave/wire-saving type
Connectable detectors (sold separately)
■
■ Do not connect this device to any product other than those listed below. Connection to
other products may result in an accident or failure.
Model
SA-S110 High precision/slim type
SA-S110/03N High precision/slim type/low performance
SA-S510 Universal slim type
SA-S510/03N Universal slim type/low performance
Resolution settings and detector replacement
Resolution varies depending on the detector that is connected. Connection of the detector is detected
automatically. As a result, there is no need to perform the parameter setting procedure required with
previous products.
Be sure to turn off the power before replacing with a different detector, and adjust the new detector and
master prior to use.
Optional parts (sold separately)
■
Model
SA-SD-SH2M Detector connection cable
SA-SD-SH5M Detector connection cable
SA-SD-SH10M Detector connection cable
SA-SD-SHL2M Detector connection cable
SA-SD-SHL5M Detector connection cable
SA-SD-SHL10M Detector connection cable
Characteristics
Power cable
Connected master
Connected master
Connected master
Connected master
Connected master
Connected master
Caution
Characteristics
Name
2 - 1
Pass/
Power supply
fail output
Yes
Yes
Yes
Yes
Yes
Yes
No
Measurement
Resolution
range
0.1 µm
10 mm
10 mm 0.1 µm
0.5 µm
10 mm
10 mm 0.5 µm
Description
Straight connector: 2 m
Straight connector: 5 m
Straight connector: 10 m
L-type connector: 2 m
L-type connector: 5 m
L-type connector: 10 m
Input/output
NPN
PNP
NPN
PNP
NPN
PNP
−
Indication
accuracy
1.0 µm
1.0 µm
2.0 µm
2.0 µm