Lever Ratio (Lever) - Citizen SA-SD Operation Manual

6-1-10 Lever Ratio (LEVER)

Parameter name
Lever ratio (LEVER)
The figure below shows a lever ratio of 2:1.
When the lever ratio is set to "2," the judgment value will be twice a normal measurement value.
Operation procedure
■
Long press
2秒長押し
for 2 s
HI.SET LO.SET
Note
■
If the lever ratio is set to a value that is out of range, digital display MAIN (white) shows ######.
The display then returns to the lever ratio setting screen, allowing the lever ratio to be set again.
If a measurement point is on a lever, the measurement value can
be displayed as detected value × lever ratio.
0.1 to 100.0
2 :
ADVANC CALC COPY BANK
HYSTER TEACH TOL <±> PR.VAL PR.OBJ
6- 14
Setting value
[Default: 1.0]
1
CALIB RESET MAINTE
PR.SAVE DIRECT
Select
選択
Commit
確定
Remarks
/
SPEED OUTPUT
Cancel
キャンセル
Shift between
Change numerical
digits
values
桁移動 数値変更