Mitsubishi MOTORS Colt 2007 Owner's Manual page 82

Seat and seat belts
● Before purchasing a child restraint system, try installing it
in the rear seat to make sure there is a good fit. Because of
the location of the seat belt buckles and the shape of the
seat cushion, it may be difficult to securely install some
manufacturer's child restraint systems.
If the child restraint system can be pulled forward or to
either side easily on the seat cushion after the seat belt has
been tightened, choose another manufacturer's child
restraint system.
2
WARNING
!
● When installing a child restraint system, refer to the
instructions provided by the manufacturer of the
restraint system. Failure to do so can result in severe
or fatal injury to your child.
● After installation, push and pull the child restraint
system back and forth, and side to side, to see that it
is positively secured. If the child restraint system is
not installed securely, it may cause injury to the
child or other occupants in the case of accident or
sudden stops.
● When the child restraint system is not in use, keep
your child or infant seat secured with the seat belt or
remove it from the vehicle in order to prevent injury
to your child.
2-34
NOTE
● Depending on the seating position in the vehicle and the
child restraint system that you have, the child restraint can
be attached using one of the following two locations:
• To the lower anchorage in the rear seat ONLY if the
child restraint has ISOFIX mountings (See page 2-40).
• To the seat belt (See page 2-42, 2-45).