Mitsubishi MOTORS Colt 2007 Owner's Manual page 144

Instruments and controls
● Automatic reset mode
When 4 hours have passed after the ignition switch is
turned to the "OFF" or "ACC" position, the display is
automatically reset. It then shows "---".
● Manual reset mode
If you reset the display at the time when you want to start
the measurements, average fuel consumption from that
point of time can be displayed.
Push the "DISP" button for more than 5 seconds.
3
NOTE
● While the ignition switch is in the "ON" position, the
automatic reset mode is permanently selected. If you wish
to make continuous measurements, select the manual
mode.
3-24
Driving range
This value shows the distance (in km or miles) that can be
driven on the fuel remaining in the fuel tank.
E00509400045