Mitsubishi MOTORS Colt 2007 Owner's Manual page 194

Starting and driving
NOTE
● You must have the brake pedal firmly depressed when
moving the allshift lever. If you only move the allshift
lever (without depressing the brake pedal), a gearshift will
not take place. At this time, a "0" will appear on the
allshift indicator display to show that a gearshift has not
taken place. Depress the brake pedal to cause the gearshift
to take place. The allshift indicator display will show the
selected gearshift position.
Choosing between automatic mode and manual mode
Automatic mode or manual mode can be selected whether the
vehicle is stationary or in motion.
When the allshift lever is placed in the "A" (Auto) position
from the "S" (Stand by) position, the transmission switches
from automatic mode to manual mode or vice versa and the
4
currently selected mode is indicated on the allshift indicator
display. In automatic mode, "A" is shown, and in manual
mode, "1 through 6" is shown on the allshift indicator display.
4-28
E00612800044
NOTE
● When you turn the ignition switch to the "ACC" or
"LOCK" position, the mode selection used up to that
point will be erased. When you subsequently turn the igni-
tion switch to the "ON" position, a mode will automati-
cally be selected as follows:
• 1500 models (5-door models, petrol-powered vehicles):
automatic mode
• Except for 1500 models (5-door models, petrol-powered
vehicles): manual mode
or
through