Mitsubishi MOTORS Colt 2007 Owner's Manual page 93

Installing a child restraint system to a
3-point type seat belt (with emergency locking
mechanism)
For safety, you are advised to install the child restraint system
using a 3-point type seat belt with emergency/automatic lock-
ing mechanism. If you cannot avoid installing it using another
type of seat belt, follow the instructions given below.
3-door models
E00408700301
Front passenger seat
5-door models
Installation:
1. Fasten the seat belt to secure the child restraint system.
(For a rear-centre 3-point type seat belt (5-door models),
refer to "Rear-centre 3-point type seat belt" on page 2-26.)
Make sure you hear a "click" when you insert the latch
plate in the buckle.
2. Remove all slack by using the locking clip.
3. Push and pull the child restraint in all directions to make
sure it is secure.
Seat and seat belts
Front passenger seat
2-45
2