Instruments and controls
3. Make your selection by pressing the "
"
" button.
3
- CT ON (Automatic mode)
- CT OFF (Manual mode)
NOTE
● After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the "MENU" button for at least 2 seconds.
• Make no entry for 7 seconds.
3-18
Automatic mode (For vehicles with MITSUBISHI
" button or the
MOTORS genuine audio)
The automatic mode can set the local time automatically by
using the signal from the local RDS stations. In this mode, CT
(A) is shown in the display. Refer to "Radio data system
(RDS)" on page 5-32, 5-32.