For emergencies
6. Place the jack under one of the jacking points (C) shown
in the illustration. Use the jacking point closest to the tyre
you wish to change.
WARNING
!
● Set the jack only at the positions shown here. If the
jack is set at a wrong position, it could dent your
6
vehicle or the jack might fall over and cause per-
sonal injury.
● Do not use the jack on a tilted or soft surface.
Otherwise, the jack might slip and cause personal
injury. Always use the jack on a flat, hard surface.
Before setting the jack, make sure there are no sand
or pebbles under the jack base.
6-24
7. Holding the jack in position by hand, turn the handle until
the flange portion (D) fits in the groove (E) at the top of
the jack.