Mitsubishi MOTORS Colt 2007 Owner's Manual page 261

To listen to a CD
With a CD player
1. Insert the disc with the label facing up.
When a disc is inserted, the DISC indicator (13) will come
on and the CD player will begin playing even if the radio
is being used. The CD player will also start playback
when the CD button (9) is pressed with a disc in the player
even if the radio is being used.
2. To adjust the volume and tone, refer to "To adjust the vol-
ume" on page 5-27 and "To adjust the tone" on page 5-27.
NOTE
● When an 8 cm compact disc is used, the adapter is not
needed for playback. Insert the disc in the centre of the
disc-loading slot.
● For information concerning the handling of compact
discs, refer to "Handling compact discs" on page 5-56.
To fast forward/reverse the disc
To fast forward or reverse, use the TRACK buttons (12).
Fast forward
You can fast forward by holding down the
TRACK button (12) for more than 1 second.
Fast reverse
You can fast reverse by holding down the
TRACK button (12) for more than 1 second.
NOTE
● When you have fast-forwarded/fast-reversed the disc, the
playing-time may be shown with deviation.
To listen to an MP3 CD
This CD player allows you to play MP3 (MPEG Audio Layer-
E00709601020
3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet,
and Romeo formats. Each disc may have a maximum of 100
trees, 100 folders, and 255 files per disc. During MP3 play-
back, the unit can display ID3 tag information (version 2.4).
For information concerning ID3 tag, refer to "CD text and MP3
title display" on page 5-50.
side of the
1. Insert a disc containing MP3 files into the slot.
2. Press the CD button (9) for 2 seconds or longer to switch
to MP3 CD mode from normal music CD mode. The dis-
side of the
play shows "READING", then playback will begin. The
folder number and the track number will appear on the
display.
For pleasant driving
5
5-45