Mitsubishi MOTORS Colt 2007 Owner's Manual page 63

Folding the rear seat*
To create luggage space, you can fold the rear seat.
NOTE
● On vehicles equipped with the separated seat (5-door
models), each side of the rear seat can be folded independ-
ently of the other.
● On vehicles equipped with a rear shelf panel, remove the
rear shelf panel. (Refer to "Rear shelf panel" on page
5-70.)
To fold
1. Move the front seat to a position forward of the middle of
its fore-aft adjustment range. (Refer to "To adjust forward
or backward" on page 2-5.)
2. Place each head restraint in its lowest position. (Refer to
"Head restraints" on page 2-10.)
3. Move the rear seat fully forward, then fold the seatback
forward until it is held securely. (Refer to "To adjust for-
ward or backward" on page 2-9 and "Folding the seat-
backs forward" on page 2-13.)
NOTE
● If you do not move the rear seat fully forward, you will
not be able to fold the seatback forward.
4. Pull up the lock release lever (A) at the back of the seat
cushion. With the lock release lever still pulled, lift the
E00403700250
whole seat forward.
Bench seat*
Separated seat (5-door models)*
Seat and seat belts
2
2-15