Mitsubishi MOTORS Colt 2007 Owner's Manual page 39

Setting the system
1. Remove the key from the ignition switch.
2. Get out of the vehicle. Close all of the doors and the tail-
gate.
3. Press the LOCK switch (A) of the keyless entry system to
lock all of the doors and the tailgate. The hazard warning
lamps will flash once.
4. Press the LOCK switch (A) again within two seconds.
The hazard warning lamps will flash three times to show
that the Dead Lock System has been set.
NOTE
● Pressing the LOCK switch (A) once while the Dead Lock
E00305200030
System is set causes the hazard warning lamps to flash
three times, so it is possible to confirm that the Dead Lock
System is set.
● It is possible to alter the system's functionality as follows:
• It is possible to disable the operation confirmation func-
tion (flashing of the hazard warning lamps).
• It is possible to change the number of times the opera-
tion confirmation function causes the hazard warning
lamps to flash for confirmation of system operation.
For details, please contact a MITSUBISHI MOTORS
Authorized Service Point.
Locking and unlocking
1
1-11