Mitsubishi MOTORS Colt 2007 Owner's Manual page 146

Instruments and controls
● Automatic reset mode
When 4 hours have passed after the ignition switch is
turned to the "OFF" or "ACC" position, the display is
automatically reset. It then shows "---".
● Manual reset mode
If you reset the display at the time when you want to start
the measurements, average speed from that point of time
can be displayed.
To reset the display, push the "DISP" button for about 5
seconds or more.
3
NOTE
● While the ignition switch is in the "ON" position, the
automatic reset mode is permanently selected. If you wish
to make continuous measurements, select the manual
mode.
3-26
Display brightness adjustment
1. Press and hold down button (A), then press the "H" button
(B) within 1 second. A buzzer will sound, and the system
will allow adjustment of the display brightness.
E00509600050