Replacement Of Lamp Bulbs - Mitsubishi MOTORS Colt 2007 Owner's Manual

Maintenance
To replace the cover (RHD vehicles)
Align the tab (A) on the cover with the hole, then press the
cover into place.
8
8-40

Replacement of lamp bulbs

E01006900025
Before replacing a bulb, ensure the lamp is off. Do not touch
the glass part of the new bulb with your bare fingers; the skin
oil left on the glass will evaporate when the bulb gets hot and
the vapour will condense on the reflector and dim the surface.
CAUTION
!
● Bulbs are extremely hot immediately after being
turned off.
When replacing a bulb, wait for it to cool sufficiently
before touching it. You could otherwise be burnt.
NOTE
● If you are unsure of how to carry out the work as required,
we recommend you to consult a specialist.
● Be careful not to scratch the vehicle body when removing
a lamp and lens.
● When it rains or the vehicle has been washed, the inside of
the lens becomes foggy sometimes. This is the same phe-
nomenon as when window glass mists up on a humid day,
and does not indicate a functional problem. When the
lamp is switched on, the heat will remove the fog. How-
ever, if water gathers inside the lamp, we recommend you
have the lamp checked.
E01003100433