Ignition Switch - Mitsubishi MOTORS Colt 2007 Owner's Manual

Starting and driving

Ignition switch

4
LOCK
The engine is stopped and the steering wheel locked. The key
can only be inserted and removed when the switch is in this
position.
ACC
The engine is stopped, but the radio, accessory socket and
other electrical devices can be operated.
ON
The engine is running, and all the vehicle's electrical devices
can be operated.
START
The starter motor operates. After the engine has started, release
the key and it will automatically return to the "ON" position.
4-14
NOTE
● For vehicles equipped with the Daytime Running Lamp,
E00601401164
when the ignition switch is in the "ON" position, the
headlamp low beams etc. are turned on.
Refer to "Headlamps" on page 3-31.
● Your vehicle is equipped with an electronic immobilizer,
to start the engine, the ID code which the transponder
inside the key sends must match the one registered to the
immobilizer computer. (Refer to page 1-3.)
To remove the key
When removing the key, turn the key to the "LOCK" position
and remove it.