Mitsubishi MOTORS Colt 2007 Owner's Manual page 195

Performing gearshifts (manual mode)
1. Select manual mode using the allshift lever. Refer to
"Choosing between automatic mode and manual mode"
on page 4-28.
2. While holding the accelerator pedal steady, move the
allshift lever in the + (UP SHIFT) or - (DOWN SHIFT)
direction. The currently selected gear is indicated on the
allshift indicator display.
UP SHIFT
DOWN SHIFT
+ (UP SHIFT)
E00612900058
- (DOWN SHIFT)
!
● To maintain good running performance, the trans-
through
● Hard engine braking and sharp acceleration can
NOTE
● During vehicle operation, the transmission automatically
Push the allshift lever forward once to shift up one gear.
Push the allshift lever backward once to shift down one
gear.
CAUTION
mission may refuse to perform an upshift when the
allshift lever is moved to the "+ (SHIFT UP)" posi-
tion at certain vehicle speeds. Also, to prevent over-
revving the engine, the lever is moved to the "-
(SHIFT DOWN)" position at certain vehicle speeds.
cause the tyres to slip on the road surface. Perform
downshifts in a manner appropriate for the current
road conditions and vehicle speed.
shifts down when the vehicle speed decreases. It selects
1st gear just before the vehicle reaches a standstill.
Starting and driving
4
4-29