Mitsubishi MOTORS Colt 2007 Owner's Manual page 152

Instruments and controls
Type 2
Rotate the switch to turn on the lamps.
3
All lamps off
With the ignition switch in the "ON" position, head-
lamps, position, tail, licence plate, and instrument panel
AUTO lamps turn on and off automatically in accordance with
outside light level. All lamps turn off automatically
when the ignition switch is turned to "OFF" position.
Position, tail, licence plate and instrument panel lamps
on
Headlamps and other lamps go on
3-32
NOTE
● If the front fog lamps (if so equipped) turn on when they
are supposed to with the switch in the "AUTO" position,
the lamps turn off automatically with the engine switch
off.
● Do not cover the sensor (A) for the automatic on/off con-
trol by affixing a sticker or label to the windscreen. Also,
do not put any water-repellent coating on the windscreen.
● If the lamps do not turn on or off with the switch in the
"AUTO" position, manually operate the switch and we
recommend you to have your vehicle checked.
[Vehicles with Daytime Running Lamp]
When the ignition switch is in the "ON" position and the lamp
switch is set to the " " (OFF) position, the low beam of the
headlamps, tail lamps, etc., will illuminate.