Mitsubishi MOTORS Colt 2007 Owner's Manual page 251

NOTE
● If the TUNE/SEEK button (3 or 4) is pressed for more
than 1 second, the radio will try to find out another broad-
cast of the same program type as currently selected.
● If no station is found with your desired PTY, the display
will show "EMPTY" for about 5 seconds and the radio
will return to the previous station.
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (3 or 4) to tune the
PTY to be entered in the memory.
2. Press one of the memory select buttons (2) for 2 seconds
or longer. The sound will be momentarily interrupted
while the PTY is being entered into the memory. The
number of the button corresponding to the entry into the
memory and the PTY are displayed.
3. The preset memory setting is retrieved by pressing the
button and then releasing it within about 2 seconds.
To change the language of PTY display
You can select your favourite language among English, French,
German, Swedish, Spanish and Italian.
1. Press the "MENU" button (A) to select the language of
PTY display mode.
Refer to "Function setup mode" on page 5-38.
2. Press the audio adjust button (B) to select a language.
NOTE
E00721400034
● After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the "MENU" button (A) for at least 2 seconds.
• Make no entry for 7 seconds.
For pleasant driving
E00721500110
5
5-35