Mitsubishi MOTORS Colt 2007 Owner's Manual page 378

Maintenance
3. Referring to the fuse load capacity table, check the appro-
priate fuse for the problem.
A- Fuse is OK
B- Blown fuse
NOTE
● If any system does not function but the fuse corresponding
to that system is normal, there may be a fault elsewhere in
the system. We recommend that you have your vehicle
checked.
8
8-36
4. Insert a new fuse of the same capacity by using the fuse
puller and insert the fuse at the same place in the fuse
block.
CAUTION
!
● If the newly inserted fuse blows again after a short
time, we recommend that you have the electrical sys-
tem checked to find the cause and rectify it.
● Never use a fuse with a capacity larger than that
specified or any substitute, such as wire, foil, etc.;
doing so will cause the circuit wiring to heat up and
could cause a fire.