Mitsubishi MOTORS Colt 2007 Owner's Manual page 226

For pleasant driving
Operating the heater system
Heating
Set the mode selection dial to the "
selection switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to
the desired temperature. Select the desired blower speed.
5
NOTE
● For maximum heat, set the blower speed to the 3rd posi-
tion.
5-10
E00701800104
" position and set the air
Maximum heating (diesel-powered vehicles)
Use it when the engine coolant temperature is low and you
wish to increase the heating performance.
1. Set the air selection switch (A) to the outside position.
2. Set the mode selection dial to the "
3. Set the temperature control dial to the highest position.
4. Set the blower speed selection dial to the 3rd position.
NOTE
● As the engine speed increases, the electric heater in the
heater system will operate to further increase heating per-
formance.
E00724600011
" position.