Mitsubishi MOTORS Colt 2007 Owner's Manual page 341

Cleaning plastic parts
Use a sponge or chamois leather.
If a car wax adheres on a grey or black rough surface of the
bumper, moulding or lamps, the surface becomes white. In
such a case, wipe it off using lukewarm water and soft cloth or
chamois leather.
CAUTION
!
● Do not use a scrubbing brush or other hard tools as
they may damage the plastic part surface.
● Do not use wax containing compound (polishing
powder) which may damage the plastic part surface.
● Do not bring the plastic parts into contact with gaso-
line, light oil, brake fluids, engine oils, greases, paint
thinners, and sulphuric acid (battery electrolyte)
which may crack, stain or discolour the plastic
parts.
If they touch the plastic part, wipe them off with soft
cloth, chamois or the like and an aqueous solution of
neutral detergent then immediately rinse the
affected parts with water.
Chrome parts
In order to prevent spots and corrosion of chrome parts, wash
with water, dry thoroughly, and apply a special protective coat-
ing. This should be done more frequently in winter.
Aluminium wheels*
E00901300071
1. Remove dirt using a sponge while sprinkling water on the
wheel.
2. Use neutral detergent on any dirt that cannot be removed
easily with water.
Rinse off the neutral detergent after washing the wheel.
3. Dry the wheel thoroughly using a chamois leather or a soft
cloth.
CAUTION
!
● Do not use a brush or other hard implement on the
wheels.
Doing so could scratch the wheels.
● Do not use any cleaner that contains an abrasive
substance or is acidic or alkaline. Doing so could
cause the coating on the wheels to peel or become
discoloured or stained.
● Do not directly apply hot water using a steam
cleaner or by any other means.
● Contact with seawater and road deicer can cause
corrosion. Rinse off such substances as soon as pos-
sible.
E00901400014
Vehicle care
E00901500086
7
7-7