Mitsubishi MOTORS Colt 2007 Owner's Manual page 320

For emergencies
7. On vehicles with wheel covers, first remove the covers
(refer to "Wheel covers" on page 6-34). Then loosen the
wheel nuts with the wheel nut wrench. Do not remove the
wheel nuts yet.
8. Find the closest jacking point to the flat tyre (refer to
"Jacking up the vehicle" on page 6-23). Then position the
jack and raise the vehicle until the tyre is slightly off the
6
ground.
9. Remove the wheel nuts with the wheel nut wrench, then
take the wheel off.
CAUTION
!
● Handle the wheel carefully when changing the tyre,
to avoid scratching the wheel surface.
6-30
10. Clean out any mud, etc. on the hub surface (C), hub bolts
(D) or in the installation holes (E) in the wheel, and then
mount the spare tyre.