NOTE
● When mounting the lamp unit, align the holes in the lamp
unit with the pins (G) on the vehicle body.
NOTE
● To install the bumper protector, first fit the endmost tabs
(H) into the holes in the body, then fit the remaining tabs
one by one, starting with the tab closest to the side of the
vehicle and working inward towards the centreline of the
vehicle.
CAUTION
!
● Handle halogen lamp bulb with care. The gas inside
halogen lamp bulb is highly pressurized, so drop-
ping, knocking, or scratching a halogen lamp bulb
can cause it to shatter.
Maintenance
8
8-53