Connect The Shared Port Adapter Cables - Cisco ASR1002 - ASR 1002 Router Quick Start Manual

Figure 10 Cisco ASR 1002-F Integrated Route Processor Management Ethernet Port Connector
1 Management Ethernet port
Insert the other end of the RJ-45 cable to your management device or network.
Step 2
Configure the port connection to a fixed speed through the command-line interface (CLI) commands.
Step 3

Connect the Shared Port Adapter Cables

The instructions for connecting the cables for the shared port adapters installed in the Cisco ASR 1002-F Router are contained
in the Cisco ASR 1000 Series Aggregation Services Routers SPA and SIP Hardware Installation Guide.
1
0
13