Air Inlet Direction Change; For Rpi(L/H)-(0.4-6.0)Fsre Units; For Rpi(L/H)-(0.4-6.0)Fsre Units - Hitachi RCI-1.0FSR Service Manual

2 Optional accessories

Air Inlet Direction Change

2.8 Air Inlet Direction Change

2.8.1 For RPI(L/H)-(0.4-6.0)FSRE units

It is possible to change the factory-default air inlet position from back side to the bottom side in the entire RPI(L)-FSRE
range.
This change of air inlet from the back side to the bottom side can be achieved by adding an optional accessory (*)
specifically designed for this purpose.

Inlet air
direction

Inlet cover
?
N O T E
Inlet change accessory codes:
- D-ICA15R (7E590912) - RPIL-(0.4-1.5)FSRE
- D-ICA20R (7E590913) - RPI-(1.5-2.0)FSRE
- D-ICA30R (7E590914) - RPI-(2.5-3.0)FSRE
- D-ICA60R (7E590915) - RPI-(4.0-6.0)FSRE
34 SMGB0137 rev.0 - 05/2021


Bottom cover
Inlet Change Accessory Kit
Inlet Change
Accessory Kit