Removal Of The Air Filter - Hitachi RCI-1.0FSR Service Manual

7 Servicing
RPI(L/H)-(0.4-6.0)FSRE - Ducted indoor unit

7.5.12 Removal of the air filter

There are two options for filter extraction, depending on the location of the unit:

Lower extraction
1 Turn 90° the locking bolt and remove the lower air filter support from the unit.
2 Pull down the air filter.
Inlet air
RPIL-FSRE

Lateral extraction
1 Turn 90° the locking bolt and remove the lateral Air Filter support from the unit.
2 Pull the Air Filter and fold it over the joint as much as you need for the extraction.
Optionally, the RPI-(1.5~2.0)FSRE unit allows access to the filter from the opposite side for proper maintenance.
1 Turn 90° the locking bolt and remove the lateral air filter support from the unit.
2 Pull the air filter and fold it over the joint as much as you need for the extraction.
Inlet air
RPIL-FSRE
234 SMGB0137 rev.0 - 05/2021
Inlet air
Inlet air Filter
Inlet air
Inlet air Filter
Inlet air Filter
Inlet air Filter
RPI(H)-FSRE
Inlet air Filter
RPI(H)-FSRE Right side
RPI(H)-FSRE Left side
Inlet air