Hitachi RCI-1.0FSR Service Manual page 135

5 Optional functions
Optional functions through Remote control
Element Optional function
Not used
S8
?
N O T E
O: allows for individual setting.
X: the setting is made for all outdoor units.
–: not used.
?
N O T E
• The changes to the optional function settings must be done after 3 minutes have passed since start-up.
• It is recommended to keep track of the changes made to optional function settings, for further reference.
• The available optional settings are different depending on the indoor and outdoor unit models. Check the technical documentation of
the indoor and outdoor units to ensure whether the optional settings are available for these units.
• The optional functions with "X" mark at the individual setting column can change the condition only when "All Rooms" is set.
• The following optional functions are disabled when RPI units with Econofresh are installed: b7, Cd, CF, d6, E9, H1, H4, J4, J7, J8,
JA, JB, K5.
125 SMGB0137 rev.0 - 05/2021
Individual
Settings
setting
00
01
02
03
04
05
06
07
- -
08
09
10
11
12
13
14
15
Setting conditions
Use at 00 conditions
Description
5